Explore our primary portfolio of high-precision desktop dispensing platforms, inline robot systems, light sources, and electronic components dispensing valves manufactured to meet rigorous quality standards.
Founded in 2013, Shenzhen Anyco Automation Equipment Co., Ltd. stands as a national high-tech enterprise integrating research and development, manufacturing, sales, and comprehensive after-sales technical support for automated fluid control systems. With our headquarters in the technological hub of Guanlan, Shenzhen, and our specialized production facility in Huizhou spanning over 2,000 square meters, we have pioneered robust manufacturing systems tailored for high-accuracy operations.
Anyco positions itself at the medium and high-end market, delivering bespoke, high-volume production of precision industrial dispensing injection valve accessories, customized actuators, industrial dispensing machines, and consumables. Through years of R&D, our proprietary technologies enable high-speed and ultra-precise intelligent solutions across a multiple of industrial niches.
In automation, a single action actuator (often called a single-acting cylinder or spring-return actuator) utilizes a single compressed air port to drive the piston in one direction (e.g., stroke extension), while a heavy-duty mechanical spring manages the retraction stroke. This design is highly prioritized in precision fluid control because it offers inherent safety features and cycle reliability.
When engineering high-frequency dispensing valves, such as the PDV-3000A Piezoelectric Jet Valve or needle valves, actuator responsiveness directly correlates with dispensing accuracy. A single-action actuator simplifies pneumatic routing, reducing cycle latency down to milliseconds. If a sudden power or pneumatic failure occurs, the mechanical spring instantly pushes the piston to its default position—typically closing the fluid path to prevent raw material waste or board contamination.
| Actuator Type | Cycle Speed (ms) | Fail-Safe Mode | Energy Consumption | Best Application Scenarios |
|---|---|---|---|---|
| Single Action (Spring Return) | < 5 ms (Fast Shut-off) | Automatic Close (Mechanical Spring) | Low (Air consumed in 1 direction) | Precision dispensing, emergency shutdown, high-frequency jetting |
| Double Action (Air-to-Air) | 10 - 20 ms | Stays in last position (requires backup tank) | Medium (Air consumed in both strokes) | Material handling, heavy clamping, continuous movement |
| Piezoelectric Actuator | < 1 ms | Electrical reset required | Very Low (Capacitive loading) | Micro-scale solder paste jetting, semiconductor sub-fill |
For industrial automation clients, specifying a custom single-action actuator involves defining the force-output requirements of the spring at maximum compression, selecting custom seal geometries (such as dynamic PTFE lip seals for aggressive solvents), and ensuring compatibility with high-viscosity media. Our engineering team customizes these characteristics to matches specific stroke limits and frequency demands.
Anyco is committed to answering complex client requirements by providing one-on-one customization. Our primary export footprints span across Southeast Asia, India, Vietnam, Thailand, North America (Mexico), and Africa (Morocco), where we have secured a high reputation for delivering high-performance fluid control mechanisms at competitive price tiers.
We leverage a portfolio of proprietary technologies and core intellectual property to serve global manufacturers in the home appliance, consumer electronics (3C sector), and automotive electronics industries. Users rely on Anyco's hardware due to its operational reliability, seamless flexibility, and integration into existing robotic setups.
Our custom single action actuators can be configured for specific stroke limits, spring force thresholds, and port designs to align with the unique parameters of your automated assembly lines.
Operating at the heart of the world's most dense electronics manufacturing cluster allows Anyco to provide distinct structural, logistical, and technical advantages for global buyers.
Our engineering facility in Huizhou turns custom actuator concepts and fluid control valve prototypes into high-performance components within 7 to 10 working days, speeding up time-to-market.
Located in Guangdong, we procure raw stainless steel, specialized seals, and high-frequency coils from premium local suppliers, reducing external supply chain delays.
Our factory floor utilizes high-precision CNC multi-axis milling machines, laser welding, and micro-polishing tools to guarantee tolerances within ±0.005mm.
Each single-action valve actuator and dispensing pump goes through million-cycle endurance testing, high-pressure leak testing, and digital dynamic analysis before leaving the factory.
A direct visual look inside our Huizhou manufacturing workshops, showcasing cleanrooms, assembly lines, testing equipment, and storage facilities.
Precision automation requires tailoring products to specific application challenges. Anyco delivers complete turnkey solutions combining single-action actuators, controllers, and dispensing systems for diverse industrial needs.
High-speed deposition of underfills, camera module adhesives, and conductive inks. Our actuators and jetting valves handle viscous fluids with micron-level consistency, preventing excess paste and board errors.
Application of thermal interface materials (TIMs), structural bonding agents, and conformal protective coatings for ADAS sensors, battery management systems (BMS), and dashboard displays.
High-frequency fluid dispensing of epoxy resins and die attach adhesives. Our single-action mechanisms maintain steady positioning in continuous, multi-shift cleanroom environments.
Dispensing moisture-barrier silicone and polyurethane sealants onto control panels and motor housings, securing protection against water and heat degradation.
The industrial automation landscape is undergoing rapid shifts, driven by the need for higher production outputs, material waste reduction, and real-time process monitoring. Our R&D efforts focus on several developments:
1. Focus: Dedicated strictly to precision fluid control systems, dispensing machine hardware, and custom actuator accessories for the electronics and industrial assembly sectors.
2. Technological Leadership: A prominent global supplier of high-speed piezoelectric jetting valves, offering alternative systems to Vermes industrial setups.
3. Product Excellence: Tailored machinery for the 3C market (Smartphones, Tablets, Wearables) and specialized high-speed fluid control for solder paste, UV resins, and conformal coatings.
4. Mission-Driven Service: Providing one-on-one customization, reliable shipping, and comprehensive remote technical support to minimize client downtime.
Find expert answers to common queries regarding single-action actuators, customized fluid control systems, OEM capabilities, and procurement from Anyco.
A single-acting actuator uses compressed air to stroke in one direction and an internal mechanical spring to return. This design requires less pneumatic piping and offers an automatic fail-safe return if air pressure is lost. A double-acting actuator requires air pressure to drive both strokes, which consumes more compressed air and lacks a mechanical spring-return safety mechanism.
Yes. We specialize in fluid control systems for the 3C electronics market. We customize the inner piston diameter, spring tension, and dynamic seals (using high-durability Teflon or Viton compounds) to ensure our actuators resist wear from abrasive fillers present in silver paste and solder paste.
Yes. Many of our precision systems, including our online follow-up robot dispensing equipment and floor-standing conformal coating machines, carry CE Certification, verifying compliance with European safety, health, and environmental standards.
For standard modifications on existing valve actuator platforms, lead times range from 5 to 7 business days. For fully customized designs requiring new engineering drawings, tooling, and cycle-testing, lead times average 15 to 25 business days, depending on technical complexity.
We provide comprehensive support via online video consultations, dedicated configuration guides, and fast dispatch of spare parts from our Huizhou hub. For key projects, our technical service engineers are available for remote integration support to ensure smooth integration with your local assembly systems.
Browse our select line of industrial conformal coating systems, laboratory-grade UV curing ovens, precision light sources, and industrial dispensing consumables.
Anyco Automation
