Explore our state-of-the-art precision components, LED UV curing systems, and automatic coating machinery designed to meet demanding manufacturing tolerances.
Why precise fluid deposition and selective encapsulation are critical to the survivability of mission-critical printed circuit board assemblies (PCBAs) globally.
In the age of autonomous driving, IoT connectivity, and deep electrification, electronic systems are subjected to extreme environmental factors. From high salt-spray marine environments to the severe thermal shock of under-the-hood automotive modules, PCBAs demand absolute isolation from contaminants. Historically, entire boards were dipped or manually sprayed with protective resins. However, modern dense component layouts, high-frequency signal lines, RF shields, and sensitive optical sensors require strict "Keep-Out-Zones" (KOZ) where coating application is strictly prohibited to prevent signal attenuation or interface failure.
This challenge has driven the rapid adoption of selective conformal coating equipment. By combining multi-axis Cartesian or SCARA robotic motion profiles with ultra-precise jetting and needle valves, selective coating machines apply thin, uniform layers of acrylics, silicones, polyurethanes, or UV-cure resins only where targeted. This precision reduces raw material waste, eliminates manual masking steps, and yields highly repeatable results necessary for high-volume automated production lines.
Maintains a positional repeatability of down to ±0.02mm, ensuring coating edges do not bleed into non-coated RF pads or contact points.
Integrated non-contact atomizing and film-coating systems guarantee wet film thickness uniformity across diverse component profiles (30μm to 200μm).
At Shenzhen Anyco Automation Equipment Co., Ltd., we tackle the core issues of selective coating head design: material viscosity fluctuation and nozzle clogging. Fluid viscosity is highly dependent on ambient temperature, which changes throughout a manufacturing shift. Our premium ODM solutions utilize integrated fluid pre-heaters and closed-loop pneumatic pressure feedback to ensure a constant volumetric flow rate. Our dual-valve design options allow a single machine to mount both a film coater valve for wide area coverage and a micro-dispensing needle valve (such as the V-420A Micro Needle Valve) for detailed trace coating, completely eliminating secondary manual rework.
Analyzing current global demand trends across major electronic manufacturing hubs.
The global surge in Electric Vehicles (EVs) requires highly robust Battery Management Systems (BMS), motor control units (MCUs), and ADAS sensor clusters. These components must withstand high voltages, moisture, vibration, and thermal expansion, making automated selective conformal coating mandatory for safety-critical validation.
Smartphones, smartwatches, and wearable healthcare devices have highly compacted PCBs where spaces between shielding cans and passive components are measured in microns. Anyco’s high-speed piezoelectric jetting valves enable precise dispensing without splashing or capillary bleed-out.
Solar inverters, wind turbine controllers, and aerospace communication transceivers require ultra-thick polyurethane or silicone barriers. Multi-pass coating options on our customizable platforms ensure structural longevity under heavy UV exposure and corrosive sea breeze conditions.
Procuring industrial selective coating lines from China is no longer just about lower unit cost; it is about speed-to-market and deep engineering customization. The Shenzhen-Dongguan-Huizhou industrial belt represents the world's most concentrated ecosystem for mechanical design, sheet metal fabrication, precision CNC machining, and automated software engineering.
At Anyco Automation, our close proximity to specialized component manufacturers allows us to take a custom machine concept to physical deployment within a fraction of the time required by Western competitors. While standard catalog vendors take 12 to 16 weeks to execute minor alterations, our ODM customization loop takes less than 4 weeks, including custom gantry adjustments and dual-valve modifications. Furthermore, we lower the total cost of ownership (TCO) through direct component-level sourcing, giving you access to high-performance piezoelectric crystals and valves at highly competitive prices.
How Anyco configures fluid control equipment to address localized manufacturing environments and regional regulations.
High ambient humidity requires conformal coatings with outstanding moisture-barrier characteristics. Anyco provides turnkey inline solutions equipped with infrared pre-heat tunnels to flash solvents off quickly and avoid bubbles or micro-voids trapped under the resin layer.
Proximity to major automotive plants requires strict compliance with clean-room standards and SMEMA electrical line interfaces. Anyco's machines feature complete CE certification, online conveyor line communication protocols, and industrial MES software integration.
As a rising automotive production hub for European markets, Moroccan factories demand robust desktop coating units (like the AC-T551 series) that offer high repeatability, ease of operator training, and minimal preventive maintenance requirements.
In response to global VOC (Volatile Organic Compound) restrictions, chemical suppliers are shifting toward solvent-free UV-curable coatings. Traditional solvent-based coatings rely on heat tunnels to evaporate carrier liquids, which consumes high amounts of electricity and releases volatile gases. Modern factories are replacing these systems with UV LED systems that cure coatings in seconds. Anyco's integration of water-cooled and air-cooled area light sources (operating at 365nm and 395nm wavelengths) provides narrow-band UV output. This configuration yields uniform, high-speed curing with minimal thermal strain on sensitive semiconductor assemblies.
Experience our manufacturing operations in Huizhou and R&D headquarters in Shenzhen.
A deep dive into Shenzhen Anyco Automation Equipment Co., Ltd.'s core strengths, technical focus, and customer commitments.
Shenzhen Anyco Automation Equipment Co., Ltd., founded in 2013, is a set of automated fluid control equipment and accessories research and development, production, sales, after-sales technical service as one of the national high-tech enterprises, one-stop precision dispensing equipment accessories customized factory. The company's headquarters is located in Guanlan, Shenzhen, and the factory is located in Huizhou, with a total area of more than 2,000 square meters. Pioneering with a portfolio of proprietary technologies and core intellectual property, Anyco delivers high-speed, high-precision intelligent manufacturing solutions for the home appliance, consumer electronics, and automotive electronics sectors. Users are satisfied with the advancement, reliability and flexibility of Anyco's equipment.
We focus on engineering advanced, high-performance fluid control and selective conformal coating systems specifically optimized for complex, high-mix electronics assembly environments.
We are a leading developer of piezoelectric jetting valve technology, offering high jetting frequencies (up to 1000Hz) and stable micro-dot dispensing capability.
Our product catalog is designed to meet the precision demands of the 3C smartphone segment and the high-volume reliability required for global automotive electronics.
Our core mission is to provide outstanding technical service, minimize machine downtime, and optimize the total cost of ownership for our clients worldwide.
Technical explanations and integration advice for engineering managers and purchasing professionals.
Select from our specialized line of non-contact pneumatic injection valves, industrial dispensing needles, and online robot systems.
Anyco Automation
