Providing high-precision dispensing, fluid control, and curing solutions since 2013.
Shenzhen Anyco Automation Equipment Co., Ltd., founded in 2013, stands as a premier national high-tech enterprise integrating research, development, production, sales, and comprehensive after-sales technical service. We are your dedicated one-stop precision dispensing equipment and accessories customized factory. With our corporate headquarters based in the tech-hub of Guanlan, Shenzhen, and our robust production plant located in Huizhou, we operate across a total facility footprint exceeding 2,000 square meters.
We specialized in addressing the highly sophisticated mechanical demands of modern manufacturing. In sectors requiring electrical contact paste (conductive carbon, silver, or graphite-based paste) applications, precise volume control, trace-level consistency, and structural preservation are vital. Anyco provides the precise fluid dispensing valves, automated platforms, and curing ecosystems required to apply electrical contact media efficiently across critical circuits.
Our footprint spans strategically active industrial centers across the globe. We serve major electronics assembly hub markets in Southeast Asia, India, Vietnam, Thailand, North America (Mexico), Africa (Morocco), and beyond. Through a combination of high-end equipment design and cost-competitive component supply chains, Anyco has consolidated a substantial market share and earned deep trust.
To support wholesale procurement needs, we specialize in high-volume, high-precision industrial fluid valve components, customized dispensing gantries, and related production consumables. By positioning ourselves in the medium-to-high-end spectrum, we provide engineering clients with customized configuration systems, helping factories optimize high-viscosity thermal and electrical interfaces.
Why automated micro-dispensing is key to minimizing contact resistance and ensuring system reliability.
In high-power industrial switches, automotive relays, connectors, and consumer electronic battery assemblies, the stability of the physical connection is paramount. Electrical contact paste (or joint compound) is engineered to reduce contact resistance, prevent galvanic oxidation, and seal out environmental moisture. However, manual or low-accuracy application often leads to issues like over-application (which causes short circuits) or under-application (leading to localized high thermal resistance and subsequent system failure).
To overcome these processing limitations, modern manufacturing plants utilize state-of-the-art automated fluid dispensing setups. By deploying piezoelectric jetting systems, automated 3-axis desktop gantries, and inline UV curing ovens, manufacturing engineers can deposit trace drops of electrical contact paste with micrometer precision.
Ensuring steady electric power transmission in high-vibration environments. The application of contact paste must be precise and uniform to survive continuous thermal cycling and humidity fluctuation.
Micro-joints in modern consumer devices require non-contact dispensing valves. High-viscosity silver and carbon pastes must be shot at high speeds without leaving tails or satellite droplets.
Power distribution components need localized protective layers of contact paste to deter oxidation, prevent copper/aluminum interface corrosion, and damp electrical arc energy.
A technical guide to configuring Anyco dispensing systems for abrasive conductive pastes.
Electrical contact pastes contain micro-particles of carbon, graphite, or metals to facilitate conductivity. This composition increases viscosity and introduces abrasive wear profiles to fluid nozzles. Standard needle dispensing valves wear out quickly and suffer from clogging. To prevent these failures, Anyco’s technical roadmap implements state-of-the-art valve designs combined with specialized fluidic mechanics.
| Application Parameter | Conventional Valve Challenge | Anyco Piezoelectric / Screw Valve Solution |
|---|---|---|
| Viscosity Management | High drag causes uneven extrusion and nozzle blockage. | Piezoelectric jetting action (like the PDV-3000A) utilizes dynamic shear-thinning forces. |
| Nozzle Wear | Metallic / ceramic particles wear down needle seats quickly. | Hardened tungsten carbide alloy configurations and modular fluidic paths allow quick cleaning. |
| Positional Accuracy | Stringing / tailing alters electrical trace designs. | Sub-nanoliter shot capability with clean cut-off prevents electrical bridges. |
| Productivity & Speed | Slow mechanical stroke cycles limit yield. | High-speed valve cycles up to 3000 Hz, matching high-throughput production lines. |
Why Tier-1 assembly factories select Anyco as their primary fluid technology partner.
Inside the Huizhou and Shenzhen facilities - where engineering excellence meets scaled production.
Get answers to critical fluid dynamics, system engineering, and procurement questions.
Anyco Automation
