Explore our leading industrial engineering configurations including automated desktop coaters, water-cooled UV curing devices, and custom pneumatic micro-valves.
How macro industry trends are shaping the demand for high-end V200 valves, 8000 controllers, and 8040/7160ra UV-curing architectures.
As microelectronics shrink, manufacturers require micro-needle and non-contact jetting systems that can accurately deposit underfills, solder pastes, and encapsulants at sub-nanoliter tolerances without damaging delicate silicon dies.
The industrial shift from traditional mercury arc lamps to narrow-band UV-LED systems (such as the 395nm 8040/7160ra series) minimizes thermal stress on plastic and composite components, drastically reducing carbon emissions and energy consumption.
Modern production lines require real-time pressure feedback, automated height adjustment, and cloud monitoring interfaces (characteristic of the 8000 control suite) to dynamically adjust parameters during long assembly runs.
In high-precision assembly contexts, engineering designations like V200, 8000, 8040, and 7160ra refer to a synchronized system of micro-dispensing valves, automation controllers, and UV-curing components. Navigating these requirements demands a partner that understands the mechanical and chemical complexities of fluid deposition and polymer crosslinking.
For example, the V200 series represents next-generation micro-dispensing valves designed to handle highly viscous materials, such as silver-filled conductive epoxies, without nozzle clogging. When paired with the 8000 controller, operators gain microsecond-level pulse control over pneumatic and piezoelectric actuators, ensuring uniform dot placement.
Meanwhile, the 8040 and 7160ra configurations refer to specialized UV-LED exposure arrays (water-cooled and air-cooled systems) designed for instantly curing UV-adhesives and conformal coatings on PCBA boards. This system-wide synchronization mitigates typical assembly line bottlenecks, resulting in a yield increase of up to 30% for high-throughput industrial lines.
Key pain points solved by Anyco’s engineering, supply chain resilience, and customizable modular components.
Whether dispensing abrasive thermal pastes or anaerobic acrylics, valves must resist wear. Our custom V200/V420A needle systems feature hardened tungsten carbide needles and ceramic fluid channels, extending valve life under harsh chemical conditions.
UV LEDs generate significant heat behind the diode. High-power units (like the 9040/9060 water-cooled systems) require advanced heat exchangers to prevent diode degradation, preserving a stable spectral output (395nm ±5nm) over 20,000 operational hours.
Global manufacturers need CE-certified systems that interface with existing PLC automation suites. Anyco’s equipment features open Modbus, Profinet, and digital I/O protocols to ensure simple integration into assembly platforms.
As global supply chains face disruption, Shenzhen Anyco Automation Equipment Co., Ltd. serves as a reliable manufacturing hub. Headquartered in Guanlan, Shenzhen, and supported by a robust factory in Huizhou, Anyco leverages the localized industrial cluster to provide rapid turnaround times on custom components.
Our "Factory 4.0" framework integrates advanced CNC machining, high-precision surface finishing, and quality control systems under one roof. This vertically integrated manufacturing model offers distinct advantages:
Providing specialized fluid dispensing and UV curing solutions to meet high-volume manufacturing needs globally.
Scenario: Applying conformal coatings and thermal adhesives to Advanced Driver Assistance Systems (ADAS) and EV battery management modules. Our AC-7661 and AC-M30 systems provide precise, bubble-free coatings that protect electronics from vibration and moisture.
Scenario: Precision micro-assembly of smartphones, smartwatches, and camera modules. Using non-contact pneumatic injection valves (such as the V6500) allows for fast paste dispensing down to 0.2mm gap widths at high cycle speeds.
Scenario: Sealing dialyzers, catheters, and microfluidic diagnostic chips. Anyco's UV-LED ovens provide rapid, low-temperature curing, ensuring that plastics and bio-compatible adhesives bond without thermal distortion.
Shenzhen Anyco Automation Equipment Co., Ltd., founded in 2013, is a set of automated fluid control equipment and accessories research and development, production, sales, after-sales technical service as one of the national high-tech enterprises, one-stop precision dispensing equipment accessories customized factory. The company's headquarters is located in Guanlan, Shenzhen, and the factory is located in Huizhou, with a total area of more than 2,000 square meters.
Our main markets are in Southeast Asia, India, Vietnam, Thailand, North America Mexico, Africa Morocco and so on. With its high quality and competitive price in Southeast Asia to win a huge market and good reputation. Products to high-volume sales of precision industrial dispensing injection valve accessories, industrial dispensing machines and consumables equipment as a supplement, medium and high-end positioning, to provide customers with one-on-one customized product services to meet customer customization needs.
Pioneering with a portfolio of proprietary technologies and core intellectual property, Anyco delivers high-speed, high-precision intelligent manufacturing solutions for the home appliance, consumer electronics, and automotive electronics sectors. Users are satisfied with the advancement, reliability and flexibility of Anyco's equipment.
Anyco is committed to building value-driven solutions for global industrial supply chains:
Inside our Huizhou production base, where specialized automated dispensing valves, UV ovens, and fluid delivery devices are built and calibrated.
Detailed engineering insights addressing core issues, design configurations, and compatibility questions of our automated systems.
Anyco’s precision fluid valves leverage a combination of precise pneumatic actuation and optimized fluid-chamber geometries. By minimizing dead volume and using ceramic or tungsten carbide needles, our systems limit shear stress and heat buildup, maintaining consistent flow rates even during long production cycles.
A 395nm wavelength provides deeper penetration for thick conformal coatings and opaque adhesives, while water-cooling maintains a lower, stable diode junction temperature. This design ensures consistent UV output and prevents board warping during continuous runs, whereas air-cooled systems may struggle in hot or dusty environments.
Yes. The AC-T551-2 features a modular mounting plate and adjustable firmware that can accommodate various micro-needle, jetting, or spray valves (such as the V-420A or V6500 series). This flexibility allows you to easily switch between different fluid systems.
We provide one-on-one engineering consultations, sharing 3D CAD models and working directly with your team. We also offer factory testing, sample testing using your specific fluid materials, and remote video commissioning to ensure the machine matches your operational requirements before dispatch.
All of our automated systems, including the floor-standing conformal coating units and high-power UV light sources, carry CE certifications. This ensures compliance with European and international safety, health, and environmental standards, making global import and facility audits straightforward.
Compare our line of non-contact pneumatic injection valves, desktop rotary dispensing systems, and UV curing ovens.
Anyco Automation
