Explore our core industrial dispensing systems, UV curing units, and high-frequency jet valves
OEM High-speed AC-741GM Diaphragm Micro Impingement Needle Valve Product, Products
View Product Details
Wholesale Desktop screw-type high-precision dispensing machine Supplier, Product
View Product DetailsShenzhen Anyco Automation Equipment Co., Ltd., founded in 2013, is a recognized premier national high-tech enterprise specializing in automated fluid control equipment and micro-precision accessories. Integrating research & development, state-of-the-art precision production, international sales, and dedicated technical after-sales service, Anyco operates as a world-class one-stop customized factory for industrial fluid dispensing solutions.
Our strategic operations combine a high-tech corporate engineering headquarters in Guanlan, Shenzhen with an advanced manufacturing base situated in Huizhou spanning over 2,000 square meters. By blending cutting-edge piezo ceramic actuation physics with intelligent motion control systems, Anyco has redefined sub-nanoliter fluid deposition for modern electronic architectures.
"Through continuous innovation in piezoelectric ceramics and micro-dispensing dynamics, Anyco delivers unmatched velocity, sub-millimeter repeatable precision, and dynamic fluid versatility to global manufacturing ecosystems."
Comprehensive breakdown of non-contact piezoelectric jetting mechanisms and fluid control superiorities
The Apj2000 Piezo Valve series represents a transformative paradigm shift from legacy pneumatic needle valves to high-frequency non-contact dispensing. Operating on the Inverse Piezoelectric Effect, advanced multi-layer ceramic stacks dynamically deform under controlled high-voltage pulses, driving a high-speed ceramic strike rod to eject microscopic fluid droplets through an ultra-fine orifice.
Eliminating vertical Z-axis mechanical motion, the Apj2000 operates effortlessly above component surfaces, avoiding tip contact damage, substrate deformation, or fluid dragging. This non-contact technique guarantees consistent sub-nanoliter volume control, rendering it indispensable for high-density SMT, semiconductor packaging, and micro-electromechanical systems (MEMS).
Achieves continuous operating frequencies up to 1000 Hz (1000 drops per second), multiplying manufacturing throughput by 300% to 500% compared to traditional mechanical contact dispensing valves.
Micro-droplet volumes starting as small as 0.005 mg (nl level), enabling tight line widths down to 0.18 mm into tight component gaps, underfills, and narrow smartphone border bevels.
Capable of processing fluids across a massive viscosity dynamic spectrum, from 1 mPa.s low-viscosity UV adhesives to 2,000,000 mPa.s abrasive silver pastes, solder pastes, and thermal conductive gels.
| Technical Specification Parameter | Apj2000 Standard Model | Apj2000-Pro Industrial Grade | Apj2000-ODM Customized Unit |
|---|---|---|---|
| Actuator Type | PZT Piezoelectric Ceramic Stack | Enhanced Multi-Layer Piezo Stack | Customized High-Temp Piezo Driver |
| Maximum Jetting Frequency | up to 500 Hz | up to 1000 Hz | Tailored (up to 1200 Hz) |
| Minimum Micro-Dot Drop Volume | 0.01 μl | 0.002 μl | Sub-nanoliter customizable |
| Supported Fluid Viscosity Range | 1 – 500,000 mPa.s | 1 – 2,000,000 mPa.s | Full Rheological Range |
| Nozzle Aperture Diameter | 0.10 mm – 0.40 mm | 0.05 mm – 0.50 mm (Ruby/TC) | Custom Sapphire Orifice Sizes |
| Thermal Control Integration | Integrated Heater (Max 80°C) | Dual-Zone Heating (Max 120°C) | Cryogenic to High Temp Modules |
| Fluid Contacting Materials | 316L Stainless Steel, PEEK, Carbide | Tungsten Carbide, Silicon Nitride | Hastelloy, Ceramic & Custom Coatings |
Driving next-generation fluid dynamics with AI closed-loop control and intelligent smart factory integration
As electronic components continue to shrink and high-density advanced packaging demands higher yields, Anyco Automation’s R&D division is continuously advancing the Apj2000 architectural framework. Our multi-year engineering roadmap focuses on intelligent closed-loop self-calibration, ultra-high-frequency response, and zero-downtime maintenance paradigms.
Integrating real-time laser trajectory measurement and inline AI visual detection. The system dynamically alters piezoelectric pulse width and amplitude based on ambient temperature and fluid shear shifts to guarantee 100% volumetric consistency.
Developing ultra-fast PZT ceramic formulations and low-inertia fluid strike mechanisms capable of reaching continuous burst frequencies exceeding 1500 Hz for high-speed wafer-level packaging (WLP) lines.
Creating modular multi-channel Apj2000 array configurations managed by a centralized EtherCAT real-time industrial master control, permitting simultaneous sub-millimeter jetting across multi-up PCB panels.
Incorporating green fluidic channels and magnetic zero-friction fluid cartridges to decrease solvent flushing consumption by 60% and streamline offline cleaning turnarounds down to under 2 minutes.
Enabling automated precision manufacturing across critical global high-tech sectors
Widely adopted in flagship smartphone assembly, tablet enclosure bonding, compact camera module active alignment (AA), display panel edge sealing, and wearable device waterproofing gasket dispensing.
Provides critical fluid control for EV battery management systems (BMS), ADAS radar sensor sealing, ECU conformal coating encapsulation, and high thermal conductivity gap filler deposition.
Delivers repeatable precision for Flip-Chip underfill, System-in-Package (SiP) potting, MEMS micro-cavity encapsulation, die attach silver paste jetting, and LED phosphor dispensing.
Enables ultra-pure, non-contact micro-reagent dosing on lab-on-a-chip diagnostic devices, bio-sensor array assembly, bio-compatible adhesive bonding, and surgical instrument sealing.
Operating from our dual-center operational framework—our corporate technology head office in Guanlan, Shenzhen and our high-capacity production center in Huizhou—Anyco leverages China’s premier hardware manufacturing ecosystem to provide exceptional value to global customers.
Our facility houses high-precision multi-axis CNC machining centers, ultra-precision grinding equipment, and ISO Class 7 cleanrooms for valve assembly. By exercising total end-to-end control over component manufacturing, material heat treatments, piezoelectric ceramic aging, and microscopic optical verification, Anyco achieves an ideal balance of superior quality and competitive direct-factory pricing.
Customized fluid dispensing accessories and customized equipment for multinational OEMs and Tier-1 manufacturers
Anyco serves key industrial markets across Southeast Asia (Vietnam, Thailand), India, North America (Mexico), Africa (Morocco), and Europe. With high-volume sales of precision industrial dispensing valves and custom consumables, we tailor our solutions to meet the exact operational demands of overseas production lines.
Comprehensive rheology testing of customer-supplied fluids (viscosity curve, shear rate response, thixotropic index) to select optimal piezoelectric driver configurations.
Precision mechanical integration modelling, fluid channel structural finite element analysis (FEA), thermal flow optimization, and custom mounting interface design.
Rapid CNC prototype fabrication of valve bodies, ceramic strike rods, and customized nozzles followed by optical micro-dot validation and repeatability checks.
Automated batch manufacturing under ISO quality management, backed by global logistics dispatch, complete technical documentation, and localized integration support.
Ensuring global operational security, strict quality management, and international regulatory compliance
Every Apj2000 Piezo Valve, conformal coating system, and UV light source unit conforms to European CE standards and is produced under ISO 9001 certified quality control systems.
Through our established technical partner networks across Southeast Asia, North America, and Europe, Anyco offers localized emergency spare parts fulfillment and on-site engineering dispatch.
All wetted components, internal seals, and valve fluid paths are built using environmentally compliant, chemically inert materials (PEEK, TC, high-grade Stainless Steel) meeting global environmental directives.
State-of-the-art production environments, precision machining equipment, and stringent quality control
Direct answers from our senior engineering team regarding Apj2000 operation and ODM services
Explore our complete catalog of industrial spray valves, conformal coating units, and liquid accessories
CE Certification 200*20 Water-cooled Spray Painting Light Source + Main Unit Factories, Exporters
View Product Details
Wholesale Aluminum profile desktop single-station visual dispensing machine Suppliers, Companies
View Product Details
OEM Industrial Dispensing Metal/Plastic/PP/TT (Double Threaded /Single Barrel) Needles Supplier, Service
View Product Details
CE Certification Online follow-up three-axis dispensing equipment Exporter, Company
View Product Details
ODM AC-T761-2 Floor-Standing Vision Conformal Coating Machine Companies, Products
View Product Details
Custom Non-contact fluid V6500- Pneumatic injection valve for Sealant application Factories, Companies
View Product Details
Anyco Automation
