Explore our core selection of precision industrial valves, micro-dispensing modules, and high-performance fluid control units built for zero-leakage networks.
In modern commercial construction, smart plumbing, and precision industrial automation, connectivity defines performance. The demand for speed, tool-free installation, and certified reliability has turned standard joints into highly engineered systems. Our ODM Plumbing Push Connectors sit at the intersection of material science and fluid dynamics, providing permanent, high-tensile connections for copper, PEX, CPVC, and high-performance polymer conduits.
Leveraging our deep foundations in high-pressure fluid dispensing—developed by Shenzhen Anyco Automation Equipment Co., Ltd. since 2013—we apply sub-micron structural engineering to plumbing connect systems. This cross-industry expert perspective guarantees that every fitting withstands continuous pressure cycles and harsh chemical agents.
Addressing the shifting demands of modern plumbing systems, rapid construction schedules, and industrial system integrations.
With manual labor costs surging worldwide, contractors need connections that don't require soldering, crimping tools, or specialized heat guns. Push connectors slash plumbing installation times by up to 70%.
Modern builds frequently combine copper risers, PEX distribution systems, and CPVC drops. Our ODM connectors bridge these material gaps with universal, dynamic slip-fit mechanisms.
Procuring for global markets requires strict compliance with NSF/ANSI, WRAS, CUPC, and CE standards. Our manufacturing lines run on absolute traceable quality frameworks.
Designing a plumbing connector that remains sealed under thermal cycles, pressure spikes, and mechanical vibration requires strict material guidelines. We implement a three-layer design:
We utilize premium DZR lead-free brass formulations to counter hard-water corrosion, ensuring compliance with global safe drinking water standards.
Featuring engineered, directional teeth that bite firmly into pipes without causing wall fatigue, preventing tube slippage during extreme pressure events.
Our dual-gasket EPDM barrier prevents degradation under high chloramine and hot water conditions, keeping systems sealed for decades.
Providing custom, modular fluid routing and high-efficiency connections across commercial, residential, and automated factory lines.
Modern manufacturing facilities—especially in consumer electronics, automotive potting, and medical packaging—rely on automated fluid dispensing systems. Anyco integrates custom push connectors directly into these fluid loops, guaranteeing the high-pressure handling required for automated glue, solvent, and adhesive lines.
Large-scale construction requires systems that can scale. Our heavy-duty ODM push fittings are optimized for commercial water service lines, hot/cold potable water loops, and closed-loop hydronic heating circuits.
Water filtration systems, softeners, and reverse osmosis (RO) plants depend on reliable, food-grade connections. Our push connectors provide a reliable interface between flexible tubing, copper pipes, and heavy water manifolds.
We design and manufacture push fittings for regional markets, including North America, Southeast Asia, and North Africa. Whether you need standard NPT threads, BSP threads, or direct-to-hose push connectors, we custom-engineer components to meet your regional market's exact specs.
Founded in 2013, Shenzhen Anyco Automation Equipment Co., Ltd. is a high-tech manufacturer specializing in the research, development, production, and after-sales support of automated fluid control systems and precision connector accessories.
With headquarters in Guanlan, Shenzhen, and our production plant in Huizhou spanning over 2,000 square meters, we supply advanced fluid distribution products and custom components globally. We serve key markets across Southeast Asia, India, Vietnam, Thailand, North America (Mexico), and Africa (Morocco).
We specialize in high-volume production of precision industrial dispensing valves, high-speed fluid control components, and custom fittings. Our focus on 3C electronics (computers, communication, consumer electronics), automotive assemblies, and home appliance sectors guarantees that our hardware operates with high precision and reliability.
Uncompromising quality, specialized manufacturing, and comprehensive customer service.
We focus on high-precision fluid control systems and connector assemblies designed specifically for complex industrial environments and commercial piping systems.
We design high-precision valves, micro-needle systems, and reliable push connectors, using advanced material science to ensure wear-resistant, leak-proof designs.
We manufacture specialized solutions for smart home systems, automotive fluid paths, and consumer electronics assembly lines that require high precision and durability.
We provide end-to-end design, prototyping, compliance testing, and scaling for custom ODM/OEM connections, delivering performance tailored to your application.
Crucial engineering and procurement answers regarding push-fit reliability, material standards, and system integrations.
Our push-to-connect fittings use a mechanical grab-and-seal structure. When a pipe is inserted, the stainless steel grab ring's directional teeth grip the outer wall of the tube, preventing pull-out. An internal O-ring (typically EPDM) compresses against the pipe's outer wall, creating a permanent, leak-free seal. An integrated guide sleeve ensures proper alignment, protecting the O-ring during insertion.
Yes, premium push-fit connectors built from DZR brass and featuring certified EPDM seals are approved under national plumbing codes (like IPC and UPC) for underground and behind-wall applications without access panels. Solderless, heat-free installation makes them ideal for tight wall spaces where open flames pose a fire risk.
DZR stands for Dezincification Resistant. Standard brass alloys can lose their zinc content when exposed to hard or acidic water, leaving behind a weak, porous copper structure that leads to leaks. DZR lead-free brass uses custom alloying elements like bismuth or silicon to resist dezincification, ensuring long-term structural integrity and safe drinking water compliance.
Yes, our connectors are designed for simple disconnection. By applying pressure to the release collar using a removal tool or clip, the grab ring's teeth release their grip on the pipe, allowing it to be pulled out safely. Once removed, the fitting and the pipe can be reused, making them excellent options for temporary test setups or system expansions.
We leverage our expertise in automated micro-dispensing, where systems handle pressure fluctuations up to 1000 PSI. We use Finite Element Analysis (FEA) to simulate stress on the grab rings and gaskets. We pressure-test 100% of our products, ensuring that each production run handles surge spikes and vibration without seal degradation.
Our products conform to major international testing programs. We support NSF/ANSI 61 and 372 for lead-free drinking safety, CE certification for European industrial systems, and RoHS compliance for environmental safety. We work closely with our ODM partners to obtain local certifications where required.
Our process starts with design submission or concept drafting (3-5 days). We then produce functional 3D mockups and metal samples for verification (10-14 days). Once the design is approved, mold manufacturing and full-scale production take 25-35 days, depending on the complexity and volume of the order.
Temperature fluctuations cause materials like PEX and brass to expand and contract at different rates. To handle this thermal movement, our push connectors feature an internal support sleeve that keeps the PEX tube concentric. The resilient EPDM seal maintains continuous contact pressure, preventing leaks during temperature cycles.
Explore our industrial-grade automation setups, specialized coating machinery, and custom-designed fluid connector manifolds.
Anyco Automation
